DURKOPP ADLER H-Type 969, Service Instructions Manual, Page: 18 / 90

Basic Principles of Working with the Machine
16 Service Instructions 969 - 01.0 - 12/2015
3.3.9 Removing and installing the feed dog
Fig. 9: Removing and installing the feed dog
Removing the feed dog
1. Remove the throat plate (

p. 15).
2. Loosen the screws (2).
3. Take the feed dog (3) off the feed dog carrier (1).
Installing the feed dog
1. Place the feed dog (3) on the feed dog carrier (1) and lightly tighten the
screws (2).
2. Install the throat plate (

p. 15)
3. Adjust the feed dog (3) so that it has an equal amount of play on both
sides when inside the throat plate.
4. Tighten the screws (2).
WARNING
Risk of injury!
Risk of crushing injuries and stab wounds from
sharp and moving parts.
Switch the machine off before you remove or install
the feed dog.
(1) - Feed dog carrier
(2) - Screws (3) - Feed dog
①
②
③