DURKOPP ADLER 991-210-10 Series, Service Instructions Manual

Page: 100 / 150

Programming
98 Service Instructions 911-210-10 - 00.0 - 06/2020
Marking lamps
Up to 4 marking lamps for easier alignment of the sewing material can be
controlled (the additional equipment must be activated)
Reversal mode
The following options can be set:
•
Not activated: The needle remains at the Stop position
• After the entire contour: After completing all seams in the contour,
the needle is reversed to the value specified in the machine parameters
• After each seam (Def.): The needle is reversed after every seam
Needle cooling
(On / Off)
Activates/deactivates the needle cooling.
Adjust sewing speed
(min. = 10… max. = 200; Def. = 100%)
The sewing speed is adjusted by the specified percent value.
PP2 - Load mode
Symbol Meaning
Load mode
The following options can be set:
•
Mode 1 (Def.)
The clamp is opened in the loading position. The clamp is closed when the
pedal is pressed. Pressing the pedal again starts the sewing of the seam.
•
Mode 2
The clamp is opened in the loading position. Pressing the pedal closes the
left part of the two-piece clamp for angle mounting. Pressing the pedal
again closes the right part. Another press of the pedal starts the sewing of
the seam.
•
Mode 3
The clamp is opened in the loading position. Pressing the pedal closes the
right part of the two-piece clamp for angle mounting. Pressing the pedal
again closes the left part. Another press of the pedal starts the sewing of
the seam.
•
Mode 4
Quick-start mode:
The clamp is opened in the loading position. The clamp is closed, and
the sewing of the seam is started when the pedal is pressed. With the
alternating clamp, the seam is automatically started after insertion.
This mode is only active when quick-start is activated in the machine
parameters. The machine must be switched off and on in order to activate
the quick-start mode.
•
Mode 5
The clamp remains closed in the loading position. Pressing the pedal again
starts the sewing of the seam.
Loading position
(On / Off)
With the loading position activated the clamps move to the desired position
for convenient insertion of the sewing material.
Symbol Meaning