DURKOPP ADLER 367 - INSTRUCTIONS FOR FITTING FOR KIT 0367 595144, Instructions Manual

Page: 19 / 22

–
Now you have to guide the hose downward with the connection
WI-N 12.
–
For this purpose put the fastening clip 10 on the hose 6. In order
to measure the length of the hose 6, hold the fastening clip 10
close to the drill-hole down on the right of the sewing machine.
Cut the hose 6 off behind the fastening clip 10.
–
Connect the hose ends with the connection WI-N 12.
–
Screw the hose 6 with the fastening clip 10 (directly at the
connection WI-N 12 with the Allen screw 11) on the drill-hole down
on the right of the sewing machine.
Guide the loose end of the hose underneath the stand.
–
Put the oil pan on and tighten the 6 screws.
–
Tilt the sewing machine to the front again.
Hints
In case you have installed the sewing light 9822 510001, not only
the hose but also the cable of the lighting are screwed on the
drill-hole down on the right of the sewing machine.
The Allen screw 11 included in the accessories is long enough to
tighten 2 fastening clips.
5
GB
6 9 10 11 12