DURAVIT Blue Moon 700143, Mounting Instructions

Page: 5 / 36

Important information
Installation information
Please read pre-installation datasheets prior to the
installation. These are available to download on the
Internet at www.pro.duravit.com.
NOTE!
If the tray has a base inlet, a pipe interrupt must always
be installed on-site.
> See installation diagram.
16
Providing for an inspection hatch (Diagram 16)
• Area: drain and overflow fittings
• Dimensions of the inspection hatch
for drain fittings: min. 20 x 20 cm
17
Closing inspection hatch (Diagram 17)
• Sealed to avoid spray water
• Only to be opened with a tool
About the mounting instructions
These mounting instructions come as part of the Duravit
bathtub and should be read carefully prior to installation.
Explanation of the key words and symbols
ADVICE! For avoiding property damage
Link to installation information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and tightness
Target group and qualification
The bathtub must only be installed by trained plumbing
engineers.
NOTE!
Local installation regulations and any country-
specific standards must be observed at all times.
BA_M_BlueMoon_Einbau_Fliesen/21.05.4
5
en
Seitenansicht
Lateral view
150
> =
Gezeichnet
Drafted
Ge ndert
Modified
Gepr ft
Certified
Datum
Date
Name Ma§stab
Scale
Name
Bezeichnung
Description
Artikel-Nr.
Model-No.
Technische Verbesserungen und optische Ver nderungen an den abgebildeten Pr odukten behalten wir uns vor.
We reserve the right to mak e technical improvements and enhance the appearance of the pr oducts shown.
1:20
1:10
1:5
X
# W- T -
Allgaier
000000 - 00 - 0
08.10.13
000000
Schematische Zeichnung mit Rohrunterbr echer
Zeichnung
Drawing
Spezial Ab-und berlaufgarnitur mit Bodenzulauf
f r Badewanne
Special waste and overflow with base inle t
for bathtubs
WLT 08.10.13