8
●
Analog Connection
Attention
• Check that the monitor and the PC are powered off.
• When replacing the current monitor with this monitor, be sure to change the PC settings for the resolution and vertical
scan frequency to those appropriate to the this monitor.
For details regarding compatible resolutions, refer to the Monitor User’s Manual (on the CD-ROM).
• Audio input/output is not supported for analog connections.
1.
Connect the signal cables to the input signal connectors and PC.
Check the shape of the connectors, and connect the cables.
After connecting the signal cable, tighten the screws of the connectors to secure the coupling.
DVI
D-SUB
D-SUB
2.
Plug the power cord into a power outlet and the power connector on the
monitor.
3.
Press to turn on the monitor.
The monitor’s power indicator lights up blue.
4.
Turn on the PC.
The screen image appears.
If an image does not appear, refer to “No picture” (page 14) for additional advice.
Attention
• Turn off the monitor and PC after using them.
• For the maximum power saving, it is recommended that the Power button be turned off. Turning off the main power
switch or unplugging the power plug completely shuts off power supply to the monitor.
Signal cable
FD-C16 (option)
Signal cable
MD-C87 (option)
or
