9
The following information has been provided to help maintain and tune the Delphi Indy Car.
ASSEMBLY GUIDE
FRONT WING
Secure the front wing (1) to
the main chassis (38) using
(3) 3x10mm flat head self-
tapping screws (B).
FRONT END
❏
1. Attach the lower front arm (12) to the main chassis (38) using (2) 3x10mm flat head self-tapping screws (B) and (2)
3x30 flat head self-tapping screws (G).
❏
2. Install the (4) 6mm pivot balls (51) into the upper suspension arms (14).
❏
3. Install the upper front arms (14) onto the lower front arms (12). Secure the upper suspension arms (12 &14) using
the front body posts (15) and (2) 3x14mm round head self-tapping screws (R).
❏
4. Install the front axles (59) into the front knuckle arms (19&20). Install a 3.8mm pivot ball (55) into the outer hole of
each of the front knuckle arms (19&20)
❏
5. Attach the knuckle arm assemblies to the arms using the 3mm king pins (58). Install the front suspension spring (57)
onto the king pin (58) below the lower suspension arm (12) as shown. Secure the spring (57) onto the king pin (58) using
(2) 2mm e-clips (N). Install a 2mm e-clip (N) onto the top of each king pin (58) to secure.
❏
6. Install the front body mount (16) to the arm assemblywith two 3x15mm self-tapping screws (R).
❏
7. Install the steering servo mount (11) to the main chassis (38) using (2) 3x10mm flat head self-tapping screws (B).
