10
MAIN CHASSIS
❏
1. Secure the center battery clip (10) to the
main chassis (38) and motor plate (39) using
(4) 3x8mm flat head self-tapping screws (A).
❏
2. Secure the battery end holders (21) to the
sides of the main chassis (38) using (4)
3x10mm flat head self-tapping screws (B).
MAIN SHOCK
❏
1. Install the shock shaft (48) into the main shock body (32).
❏
2. Install the shock cap (31) onto the shock body (32).
❏
3. Thread the adjusting nut (33) onto the shock body (32).
❏
4. Install the spring (49) onto the shock body (32) below the adjusting
nut (33) then, secure the spring onto the shock body by threading the
shock end (34) onto the shock shaft (48).
❏
4. Attach the rear body mounts (17) to the
main chassis (38) using (2) 3x10mm flat head
self-tapping screws (B).
❏
3. Attach the upper plate support
(8) to the rear of the main chassis
(38) and the front of the, motor plate
(39) using (2) 3x10mm flat head
self-tapping screws (B) in the main
chassis (38). Install a 3mm o-ring
(E) between the motor plate (39)
and the upper plate support (8) then
secure the upper plate support (8)to
the motor plate using (1) 3x15mm
flat head machine screw (F) and (1)
3mm nylon lock nut (D). Install (2)
3.8mm pivot balls (55) into the upper
plate support (8).
SIDE SHOCKS
❏
1. Thread the side shock
adjusting nut (37) onto the side
shock body (35).
❏
2. Install the side shock spring
(50) onto the side shock body (35).
❏
3. Insert the side shock shaft
(36) into the bottom of the side
shock body (35).
