8
Resistance
Range
Resolution
Accuracy
200Ω
0.1Ω
± (1.0% r 3)
2kΩ
0.001kΩ
20kΩ
0.01kΩ
200kΩ
0.1kΩ
2MΩ
0.001MΩ
20MΩ
0.01MΩ
± (1.2% r 15)
•
Input protection:
Maximum DC or AC
600V RMS
•
Input protection: Maximum DC or AC 600V RMS.
CLEANING & MAINTENANCE
•
Clean the outer cabinet of the instrument with a clean, damp cloth and a small
amount of mild detergent.
•
Do not use any chemicals, abrasives or solvents that could damage the meter.
Diode
Function
Range
Resolution
Test Environment
Diode test
1V
0.001V
Testing current: about 1mA; open circuit
voltage: about 2.8V.
The display will show the approximate
value of the diode forward voltage drop.
Buzzer On/Off
Function
Description
Test Environment
When the built-in buzzer sounds,
the measured resistance is no
more than about 50Ω.
Testing current: about 1mA; open
circuit voltage: about 2.8V.
•
Input protection: Maximum DC or AC 600V RMS.
REPLACING THE BATTERIES
•
Turn off the power supply and disconnect the probe from the measured circuit.
•
Loosen the screws used for fixing the battery cover and remove the battery cover.
•
Remove the old batteries and replace with new ones.
•
Mount the battery cover and and tighten the screws.
RECYCLING INFORMATION
This symbol indicates that separate collection of Waste Electrical and
Electronic Equipment (WEEE) or waste batteries is required. Do not dispose
of these items with general household waste. Separate for the treatment,
recovery and recycling of the materials used. Waste batteries can be returned
to any waste battery recycling point which are provided by most battery
retailers. Contact your local authority for details of the battery and WEEE
recycling schemes available in your area.
Made in China. PR2 9PP
V 1.0
