DuraTech Industries HAYBUSTER CMF-830, Operating Instructions And Parts Reference

Page: 37 / 178

23
C M F - 8 3 0 O P E R A T I N G I N S T R U C T I O N S
3.5 Operation precautions and instructions
•
Make sure there are no bystanders in the way.
•
Before loading, run the mixer empty and check all operations.
•
Do not overload the mixer. Maximum load is 21,500 lbs. (9,752 kg) Maximum load is determined by
weight, not volume.
•
Be sure all shields are in place before operation.
•
Use common sense when operating.
•
Never attempt to climb on the CMF while the tractor is running.
3.6 Starting the machine
1. Park machine on a hard level surface keeping the driveline as straight as possible.
2. Close the mixer door.
3. If the scale indicator is not at zero, re‑zero indicator per the scale indicator manufacturer’s instructions.
4. If equipped with two‑speed gearbox option, select mixing gear desired.
5. Engage the tractor PTO and increase engine RPM to desired mixing speed.
3.7 Loading and processing
1. Load baled products and materials that require processing first. The center core of round bales will be the
toughest to process. Allow enough processing time to adequately process roughage.
2. Set vertical knives per adjustment section.
3. Do not over process as processing continues through the mixing stage.
4. Load silage and/or other high moisture products next.
5. Load dry ingredients.
6. Load liquid supplements last.
7. Allow three to four minutes of mixing time after last ingredient.
8. ALL PROCESSING AND MIXING TIMES WILL VARY.
9. Do not overload the CMF, maximum capacity is 21,500 lbs. (9,752 kg) Maximum load is determined by
weight, not volume.