Instruction Manual
DPA-15D Air Hyd. Power Unit - V1.5
www.durapac.com
Page 2 of 10
This is a safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid injury or death
1.0
Product Information
DURAPAC – Double Acting Reciprocating Air Hydraulic Power Units are engineered to meet Industrial
Standards for Performance and Safety. The DPA-15D model is an air hydraulic power unit with a 4-
way valve. Its unique hydraulic circuit allows the quick displacement of hydraulic fluid under no load
conditions and easy pumping in loaded conditions. These air actuated pumps supply compressed
hydraulic fluid to a compatible double-acting cylinder, anywhere that 700 bar of fluid pressure is
needed.
4 way directional control valve to operate double acting cylinders
1.5 L usable oil reservoir
3 position valve for adv/hold/retract functions
Dust cover protection for the release control valve
Convenient carry handle included
Recommended air pressure range 4-12 bar
Special skill, knowledge and training may be required for a specific task and the product may not be
suitable for all jobs. The user must ultimately make the decision regarding suitability of the product
for any given task and assume the responsibility of safety for all in the work area. Contact a Durapac
representative if you are unsure of your power unit’s suitability for a particular application.
2.0
Receiving Instructions
It is recommended prior to use that an inspection be done by qualified personnel and that any
missing or damaged parts, decals, warning/safety labels or signs are replaced with Durapac
authorised replacement parts only. Any power unit that appears to be damaged in any way, is worn,
leaking or operates abnormally should be removed from service immediately until such time as
repairs can be made. Any power unit that has been or suspected to have been subject to a shock
load should be removed from service immediately until inspected by a Durapac authorised service
centre. Owners and operators of this equipment should be aware that the use and subsequent
repair of this equipment may require specialised training and knowledge.
3.0
Safety
Save these instructions. For your safety, read and understand the information contained within. The
owner and operator should have an understanding of this product and safe operating procedures
before attempting to use this product. Instructions and safety information should be conveyed in the
operator's native language before use of this product is authorised. Make certain that the operator
thoroughly understands the inherent dangers associated with the use and misuse of the product. If
any doubt exists as to the safe and proper use of this product as outlined in this factory authorised
manual, remove from service immediately.
DANGER:
To avoid personal injury keep hands and feet away from work area during operation
Do NOT
handle pressurized hoses. Escaping oil under pressure can penetrate the skin
