DuraComm PSDA-MU1, Owner'S Manual

Page: 1 / 47

Page 1 of 47 April 20, 2022
PSDA-MU1
Annunciator with Remote Monitoring for BDA Emergency Radio System
Owners Guide
*NOTE: Specifications are subject to change without notice.
Description
The DuraComm Annunciator provides visual and audible alarms at the installed location of a BDA in an Emergency In-
Building Radio system. This annunciator is designed to monitor NFPA 72 IDC Circuits and report the status to a Fire alarm
panel via Form C relay contacts. Power input is 90 to 264 VAC with an internal 12 Volt 12-hour backup battery. A loud
audible alarm will sound when a fault or trouble alarm is triggered. The Alarm can be muted until a normal condition is
restored, or until a scheduled daily unmute occurs. Audible alarm Mute, Unmute, and Self-Test buttons are located
inside for security.
It also provides remote monitoring via Ethernet. This allows the test point voltages to be monitored in relation to their
alarm points by a bar graph for each monitored input. The internal battery backup voltage is also monitored with its own
bar graph. Password-protected remote-control functions allow the system designer to set alarm voltages, manage user
logins, schedule audible alarm unmute, and many other features. Notifications of alarms can be sent via email or SNMP
traps. The DuraComm Annunciator comes with a 3-year warranty.
• Designed to Monitor NFPA 72 IDC Circuits
• NEMA 4, UL Listed Enclosure E333443
•
AC Power 90-264 VAC
•
Automatic Internal Battery Backup
•
Monitors up to 6 Closed Contacts and wiring
•
Separate 50 Ohm Antenna Fail
•
9 Form C Relays to Connect to Fire Alarm Panel,
Including System Fault and System Trouble
•
9 Bright LEDs Indicate Status
•
Audible Alarm with Inside Mute/Unmute
•
User Scheduled Unmute
•
Self-Test Button Inside
•
Remotely Monitor Status and More via Ethernet
•
Email and SNMP notifications
•
3 Year DuraComm Warranty