Durabase LE40U300X3CW, User Manual

Page: 46 / 136

English - 45 -
To terminate this operation and control the TV via
the remote again, press
Quick Menu
button on the
remote, highlight the CEC RC Passthrough and
set as Off by pressing Left or Right button. This
feature can also be enabled or disabled under the
System>Options>More menu.
The TV supports also ARC(Audio Return Channel)
feature. This feature is an audio link meant to replace
other cables between the TV and the audio system
(A/V receiver or speaker system).
When ARC is active, TV does not mute its other audio
outputs automatically. So you need to decrease TV
volume to zero manually, if you want to hear audio
from connected audio device only (same as other
optical or co-axial digital audio outputs). If you want
to change connected device’s volume level, you
should select that device from the source list. In that
case volume control keys are directed to connected
audio device.
Note:
ARC is supported only via the HDMI3 input.
System Audio Control
Allows an Audio Ampliier/Receiver to be used with
the TV. The volume can be controlled using the
remote control of the TV. To activate this feature set
the
Speakers option in the System>Options>More
menu as
Ampliier
. The TV speakers will be muted
and the sound of the watched source will be provided
from the connected sound system.
Note: The audio device should support System Audio Control
feature and CEC option should be set as Enabled .
E-Manual
You can ind instructions for your TV’s features in
the E-Manual.
To use E-Manual, press to the
Info button while main
menu is displayed on the screen or press Quick Menu
button, select Information Booklet and press OK .
By using the directional buttons select a desired
category. Every category includes different topics.
Select a topic and press
OK to read instructions.
To close the E-Manual screen press the Exit or Menu
button.
Note: The contents of the E-Manual may vary according to
the model.