Spindle
#6 X 1-3/8” Pan Head
Phillips Screw
Inside Handle
Outside Handle
Door Handle Components and Instructions
1. Insert the Spindle into the Outside Handle and line up holes, then push the Outside Handle on to the door.
2. Line up the Inside Handle with the Outside Handle use two (2) #6-32 x 1-3/8” pan head self tapping screws
to join the whole assembly.
3. Center the Aluminum Shim under the Striker and line up with the Inside Handle Latch, then drill two (2)
1/8” holes through the Shim and Door Jam and install two (2) #8 x 1-1/2” fl at head phillips screws.
Striker
#8 X 1-1/2” Flat Head
Phillips
Aluminum Shim
3-3/4” long x 3/4” Wide
Door
Inside
Outside
