Deadbolt Components and Instructions
Step 1
Assemble key and cylinder to outside deadbolt plate by inserting the
key and cylinder into the outside deadbolt plate and turning the key
one half turn. Remove key from cylinder prior to further installation.
Step 2
Cut spindle to 3/4” long and assemble spindle to outside deadbolt assembly.
Step 3
Insert outside deadbolt assembly (with spindle) from outside of door.
Step 4
Install dead bolt on inside of door with bolt facing jamb; install two (2) #6-32 x 1-3/8” pan head self tapping
screws.
Step 5
Extend bolt and mark the location of the curved lip strike on the jamb.
Step 6
Mark and pre-drill two holes using a 1/8” drill and install the curved lip strike with two #8-32 x 1/2” long fl at
head Phillips thread cutting screws.
CURVED LIP
STRIKE
SPINDLE
DEADBOLT
LOCK
CYLINDER
OUTSIDE
DEADBOLT
PLATE
#8-32 x 1/2”
Screws
#6-32 x 1-3/8” Screws
