Page 7
Panel and Extrusion Assembly
5.
Install the next panel, making sure it is tightly together before installing the next three (3) #8 x 1/2” screws
as you did in step 4 on the previous page. Install the rest of the panels in the same maner and install a “U”
Channel over the right side of the last panel, then install the next three (3) #8 x 1/2” screws.
6.
Install “U” Channel over the front of all Slide Out Roof Panels. (Do not use any fasteners at this time)
“U” Channel
7.
Install Left Trim using three (3) #8 x 1/2” screws. (Make sure the screws go thru the Trim, “U” Channel
and Slide Out Roof Panel)
Continued on next page.
“U” Channel
“U” Channel
“H” Bar
“H” Bar
Left Trim
Summary of Contents for DFSOC-10
Page 14: ...Notes Page 13...
Page 15: ...Notes Page 14...
