![background image](http://html.mh-extra.com/html/duplo/486p/486p_operation-manual_2540253013.webp)
13
◎
Enter the desire cutting length
8.3.3 Press
to move the backgauge to the length set, backgauge push-out the cut length
then back to the 2
nd
cut desire length automatically
8.4 Job Setting
The system enable 99 jobs setting, each job has maximum 9 cut. For Example, Job #1 for a book
3-side cutting job
8.4.1 Press
to get into job setting mode
8.4.2 Enter Job #1
8.4.3 Press
to set 1
st
cut
8.4.4 Enter the cutting length for 1
st
cut then press
to save 1
st
cut
8.4.5 Enter the cutting length for 2
nd
cut the press
to save 2
nd
cut
8.4.6 Enter the cutting length for 3
rd
cut then press
to store 3
rd
cut
8.4.7 Press
save and run the job
8.5 Select a Defined Job
8.5.1 Press
into job mode
8.5.2 Enter the job No
8.5.3 Press
to move backgauge to 1
st
cut position
8.5.4 Push-out function is default for defined job, if it is not necessary, press
to disable
* will be displayed as shown above
8.5.5 Load the paper and press 2-hand to do cutting
8.5.6 After cutting, backgauge moves to 2
nd
cut automatically