![background image](http://html.mh-extra.com/html/duplo/486p/486p_operation-manual_2540253012.webp)
12
8. Cutting Procedure
8.1 Manual Cut
8.1.1 Press
8.1.2 Press
to push-out if necessary
8.1.3 Enter the sheet length
8.1.4 Press
to bring the backgauge to the desire length as per the setting, or rotate the
manual switch clockwise to the desire length
8.1.5 Load the sheet, against backgauge and the left margin. Using the registration block to make
sure the sheet pile is squared.
8.1.6 Press 2-hand switch until the sheet pile is fully cut
8.2 Repeating Cut
This feature allow user to do repeating cut on same sheet. For example, a 21” sheet cut into 3.5”
8.2.1 Press
to set backgauge to home position
8.2.2 Enter the paper length
8.2.3 Press
8.2.2 Enter 3.5” into system then
8.2.3 Press
to do repeating cut, backgauge will move 3.5” automatically after each cut until
end of the sheet
8.2.4 For doing 2
nd
batch repeating cut, repeat 7.2.1 to 7.2.3
8.3 Push-out After Cut
This feature can be set to push the sheet out from cutting line after being cut
8.3.1 Push-out enables
◎
Press