9
5. Programming instructions
Connect the pH electrode to the Dupla pH-Control Pro . To start the programming mode press the
button
Please note:
Without connected pH-elctrode the error
will be displayed.
5.1 Clock programming
5.1.1 Time setting
pH
pH
pH
Entering the programming mode, the clock symbol
fl ash .
Press the
button, the hours digits fl ash .
Use the
▲
or
▼
button to set the hours between 0 and 23 .
Press the
button, the minutes digits fl ash .
Use the
▲
or
▼
button to set the minutes between 0 and 59 .
Press the
button, the seconds digits fl ash .
Use the
▲
or
▼
button to set the seconds between 0 and 59 .
Acknowledge with the
button .
When fi nished
will fl ash again . Scroll to the next main menu item with the
▼
button, then press the
button .
Please note:
Once the clock has been set at least once, you can use
▲
or
▼
to directly access the settings
pH
or
Time
.
Please note:
The Dupla pH-Control Pro does not automatically switch between summer time and winter time.
This change must be entered manually.
