10
5.2 pH programming
pH
pH
pH
Note:
The pH control is an alternative programming for temperature 1 in slot 1.
After acknowledging flashing
,
pH
is displayed and
SET
flashes .
If you want to programme the pH Set point, press
. Proceed making your settings as in item 5 .2 .1 of the instruc-
tions .
If you want to activate the night off function press another time the
▼
, button until
flashes and confirm by
pressing the
button . Continue making your settings with item 5 .3 .2 of this instructions .
If you want to programme the pH alarm, press the
▼
button again until flashes and confirm by pressing the
button . Proceed making your settings with item 5 .2 .3 of the instructions .
If you want to (de)activate the audible alarm function, press the
▼
button again until
flashes and confirm by
pressing the
button . Proceed making your settings with item 5 .2 .4 of the instructions .
If you want to calibrate your pH-Electrode, press the
▼
button to select
CAL
and confirm by pressing the
button . Proceed making your settings with item 5 .2 .5 of the instructions .
If you want to (de)activate the pH Calibration reminder, press the
▼
button again until
CAL
and flash and confirm
by pressing the
button . Proceed making your settings with item 5 .2 .6 of the instructions .
5.2.1 pH set point programming
pH
pH
pH
When or your last set value and
pH
are flashing, press the
button to set the pH point .
When
flashes, press the
button to confirm .
When or your last set value flashes, use the
▲
or
▼
button to set the desired pH value between and ,
and acknowledge with
.
Please note:
The pH Set Point presetting is . Depending on water values where your fish come from, higher
or lower values could be required.
