background image

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT (EU directive 2012/19/EU) This symbol on the product or its packaging 

to indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collec-

tion point for the recycling of electrical and electronic equipment, such as for example: - sales points, in case you buy a new and 

similar product - local collection points (waste collection centre, local recycling centre, etc...). By ensuring this product is disposed 

of correctly, you will help prevent potential negative consequence for the environment and human health, which could otherwise 

be caused by inappropriate waste handing of this product. The recycling of materials will help to conserve natural resources. For 

more detailed information about recycling of this product, please contact your local city office, your house hold waste disposal 

service or the shop where you purchased the product. Attention: in some countries of the European Union, the product is not 

included in the field of application of the National Law that applies the European Directive 2012/19/EU and therefore these coun-

tries have no obligation to carry out a separate collection at the “end of life” of the product

Duomo (UK) Limited,

 5 The Furlong, Berryhill Industrial Estate, Droitwich, Worcestershire, WR9 9AH, 

England, United Kingdom. Telephone: 01905 797989 Email: [email protected] website: duomo.co.uk 

Summary of Contents for CHCO











Reviews: