1"
6-1/2"
2" DEFLECTION
SPRING
ISOLATORS
FACTORY PROVIDED
MOUNTING BRACKETS
NON-SKID
NEOPRENE PAD
FLOOR
WCPS-B
3.0 INSTALLATION
iii.) Support the complete unit on spring isolators. Request factory to provide
correct spring isolators and mounting brackets at base units.
3.2 LOCATIONS
The recommended location for the units to facilitate operation and reduce cost is to locate it:
1.) Near power supply source
2.) Near drain source
3.) Near water source
The standard units are not weatherised for outdoor installation. For installation demanding
extreme quiet operation, locate WCPS-B air-conditioner outside conditioned space with both
supply and return air ducts connected to unit or provide sound attenuators on both supply and
return side.
3.3 CLEARANCE
(See Figures 3.3A & 3.3B)
Clearance must be provided for:
1.) Supply and return air ductwork ( If there are ).
2.) Condenser water piping.
3.) Electrical power and control wiring.
4.) Trapped condensate drain connection.
5.) Maintenance and service access to compressors, fan motor and drive, control panel,
condensers, filter drier, sight glass and expansion valves.
6.)
Return air ( for free air return ).
