Dungs MPA22, Operating Instructions Manual, Page: 80 / 125

80 / 125
0006081263_200705
Display in parameterisation mode
Gas firing, pneumatic modulation
Error mode overwrites all other display modes.
Error mode is not active if burner is still.
The following appears on the display:
• An "F" on the left
• The "Flame with strike-through" symbol
• The error code; occupies the three places on the right.
• The error code flashes
The error codes are listed complete with their individual meanings in the Error Codes
list below.
You must press the "Acknowledgment" or "Reset" button to reset.
Error mode
Error indication
Error code
Reset