Dune BD Prime 3.0 user manual
12
Connecting a TV/Monitor/Projector
with Component (Y/Cb/Cr) Video Input
For this connection you should use a
3RCA-3RCA video cable and (optionally) a
2RCA-2RCA audio cable for sound trans-
mission to your TV set. Please note that
video cable shall have an impedance of
75 Ohm, i.e. specially designed for trans-
mission of analog video signal.
1.
Make sure that the player and the display-
ing device are switched off. Do not switch
them on until the connection procedure is
finished.
2.
Connect the component video output of the media player to the relevant TV/monitor/pro-
jector input using a 3RCA-3RCA cable.
3.
Optionally connect the analog stereo audio output (AUDIO L/R) of the player to the rel-
evant input of a TV/monitor/projector using a 2RCA-2RCA cable. Instead, you can use
optical cable to transmit digital audio to your AV receiver; in this case better audio quality
may be expected.
4.
Using RC/buttons of TV/monitor/projector, select the required input and display mode.
For further instructions please refer to the manual of your displaying equipment.
5.
Power on the devices. Wait until the initial screen (a "DUNE" logo) is shown.
Connecting a TV/Monitor/Projector
with Composite Video Input
Since this kind of connection does not pro-
vide a high-quality picture, we recommend
to use it only in case your TV/monitor/pro-
jector does not have High Definition video
interfaces, such as HDMI, DVI or Compo-
nent (Y/Cb/Cr).
1.
Make sure that the player the TV/monitor/
projector are switched off. Do not switch
them on until the connection procedure is
finished.
2.
Connect the media player to the relevant TV/monitor/projector input using an RCA-RCA
cable.
3.
Optionally connect the analog stereo audio output (AUDIO L/R) of the player to the rel-
evant input of the TV/monitor/projector using a 2RCA-2RCA cable. Instead, you can use
optical cable to transmit digital audio to your AV receiver; in this case better audio quality
may be expected.
4.
Using the RC/buttons of your TV/monitor/projector, select the required input and display
mode. For further instructions please refer to the manual of your displaying equipment.
5.
Power on the devices. Wait until the initial screen (a "DUNE" logo) is shown.
AUDIO IN
R
L
COMPONENT
VIDEO IN
R
L
AUDIO IN
VIDEO IN
Summary of Contents for BD Prime 3.0
