Duncan MK4 Renovator, Supplement Manual

Page: 52 / 98

17
B.3.2 Info screen display features
Pressing Key H when on the individual INFO screen accesses the BIN CONTENTS
screen. See Figure 16. This screen enables the operator to programme the
contents of the bin. The NOW value refers to the calculated current contents of
the bin based on the initial value less the number of shaft revolutions x product
calibration factor. This value can be changed directly by selecting NOW and using
the key pad and pressing ENTER. Alternatively, when a specific amount of product
is being added to the bin, select ‘TO ADD’ and use the key pad and press ENTER
to add to the NOW total. The NOW total will be updated. Pressing the ESC button
(Key G) returns to the previous INFO screen.
Figure 16. BIN CONTENTS screen
Pressing the SETUP button (Key G) when on the individual INFO screen, accesses
the INFO SETUP screen. See Figure 17. This screen shows a summary of the bin
setup which was selected on the INFO screen. The 3 cursors shown in Figure 17
are the only cursor positions selectable.