21
Pt. No. 67437
Issue 0716
‘Renovator Mk4’
Read Before Calibration
Info Screen
-Individual Info Screen shown below.
Info Screen Display Features
The ‘BIN SELECTION’ button cycles through the bins. The line under the metering roll will move to the
next bin and the details for that bin will be shown. The ‘PRODUCT’ shows the product for the bin selected.
The ‘BIN CONTENTS’ button enables the operator to program the contents of the bin. The ‘NOW’ value
refers to the calculated current contents of the bin based on the work done. This value can be changed
directly by selecting ‘NOW’ and using the key pad and pressing enter. Alternatively, when a specific
amount of product is being added to the bin, select ‘TO ADD’ and use the key pad and press enter to add
to the ‘NOW’ total. Pressing the ‘ESC’ (escape) key returns to the previous ‘INFO’ screen.
The ‘INFO SETUP’ screen allows changes to the items marked with a cursor arrow. Changes to these
settings will change the settings for the product.
The ‘CALIBRATION CHECK’ is one way to start the calibration procedure. Refer to the following section.
‘BIN SELECTION’
‘PRODUCT
REMAINING’
‘SHAFT SPEED’
‘INFO’- cycle between
individual and
summary info
screens.
‘PRODUCT’
‘BIN CONTENTS’
‘INFO SETUP’
‘TODAY’-shows
the qty of product
metered and duration
for today only.
‘CALIBRATION CHECK’
Summary of Contents for MK4 Renovator
