Duncan Enviro 3000e, Owner'S Manual

Page: 28 / 130

26
DOUBLE DISCS
D Check springs for damage/breakage
D Clean any dirt build up
D Check discs for wear, damage, buckles etc
D Check discs turn freely
D Check discs for excessive sideplay (>5mm)
W Check arms for damage & sideplay
W Check tightness of pivot pin end & tab bolts
W Check tightness of disc pivot bolts
W Clean dirt build up (if any) on scrapers
W Check scrapers for wear
A Check all other bolts for tightness
SEEDERS / AGITATORS / BOTTOM FLAPS
D Check seeder housings for damage
D Check all seeder wheels are operating the same,
ie all main wheels or all small wheels
D Check agitators running correctly
W Check bottom flaps are all the same for both boxes
W Check units drive chains for damage wear etc
W Clean any dirt/dust build up on drive units
A Lubricate chai
ns
DRAWBAR, COUPLING SAFETY CHAIN, LIGHTS
D Check for damage, wear etc on coupling & chains
W Check mounting bolts for tightness
W Check anchor bolt
A Check all other bolts for tightness
A Check drawbar pivot roll pins, replace if damaged
or loose
GENERAL
A Check all bolts for tightness
A Check safety decals for damage & readability
A Check for any wear/damage/broken components
A Check for any rust, paint wear or damage
A Check seeder hoses for damage, blockages, splits etc
A Check seeder hose clips
Enviro 3000e Seed Drill
Maintenance Schedule
Table 6
Refer Maintenance Schedule Summary Chart
(Page 25)
FRONT COULTERS
D Check springs for damage/breakage
D Clean any dirt build up
D Check discs for wear, damage, buckles etc
D Check discs turn freely
D Check discs for excessive sideplay (>5mm)
W Check arms for damage & sideplay
W Check tightness of pivot pin end & tab bolts
W Check tightness of disc pivot bolts
A Check all other bolts for tightness
PRESS WHEELS
D Check for & clean any dirt build up
D Check tyres for wear, damage, cuts etc
D Check wheels turn freely
D Check for excessive sideplay
D Clean dirt build up (if any) on scrapers
D Check all height adjustments are the same
W Check scrapers for wear
W Check scraper position
W Check tightness of pivot bolts
A Check all other bolts for tightness
WHEELS
D Check tyres for damage, wear etc
W Check tyre pressures
W Check wheel nuts for tightness
W Lubricate wheel arm pivots
W Check wheel mount bolts for tightness
A Check all other bolts for tightness
A Check for wear in pivots, bushes etc
HYDRAULICS
D Clean quick release couplings
W Check quick release couplings for damage leaks etc
W Check connections for leaks, tighten if required
W Check hoses for damage leaks etc replace if required
A Clean out or replace in line filters
Key
D Daily or every 20 ha check
W Weekly or every 100 ha check (includes daily checks)
A Annual or pre-season or every 1000 ha check
(includes weekly checks)