Duncan Enviro 3000e, Owner'S Manual

Page: 75 / 130

8
B
OPERATION
B.1 Power On Routine
When the instrument is first turned on the instrument will enter a short routine to
remind the operator of the previous setup. The set up can be changed and then
accepted by pressing the ENTER key or alternatively, the routine can be skipped
by pressing the MAIN button (Key A).
The first screen on start up is the BIN SETUP screen. See Figure 1 This screen
advises the operator which products are defined to which bin. On the screen
format shown in Figure 1 the operator can use Keys E & F to cycle through the list
of products. The application rate saved against that product will also be shown.
The letter shown in the graphic will also change to reflect the product selected.
Figure 1. BIN SETUP screen
Key I can be used to move down the list with both ends of the arrow moving to
indicate the product and bin selected. Once at the end it will return to the
beginning with the next key press.
Pressing Key H accesses the BIN CONTENTS screen. See Figure 2. This screen
enables the operator to adjust the contents of the product in the bin. Pressing the
ENTER key returns to BIN SETUP screen.
A
B
C
D
E F G H I