Geelseweg, 80 | 2250 | Olen | BELGIUM | Tel. +32 (0) 14 25 92 83 | [email protected] | www.dumor.be
5
WHAT’S IN THE CRATE:
1
Main unit attached to the skid by bolts and with 4 lifting handles
2
Infeed tray extension => fits to the 3 screws on the lifting tray
3
Infeed tray magnetic posts x3 pcs => they are positioned on the sides and the end of the paper pile to guide
the paper in during feeding.
4
Infeed tray” hook on” and magnetic deflectors x 4 pcs => are positioned on the suction box and in the slot of
the cross bar see the picture for reference.
5
Outfeed tray => hooks onto the outfeed end panel and support arm into the slots below
6
Optional outfeed stepping conveyor, plugs into the socket at the end of the machine
7
Outfeed tray magnetic side and end guides set=> are positioned to receive the out-fed sheets according to size.
8
Creasing bar @1 mm pre-fitted into the slot
9
Waste bin pre- fitted under the waste chute
11
Colour touch screen display ( requires fitment by technical service) do not damage it on installation..
12
Power cord with earth line.
Small tool kit
Note that the machine is heavy and 4 strong persons will be needed to unload it from the skid
The unit is on casters with levelling feet.
Preparation of the machine before use
1. Check the voltage and frequency matches your power source before plugging in
The power source needs to be 10 amp and with a ground line.
2. Unbolt the lifting tray support plate ; failure to do so will break the lift motor and invalidate the warranty!
3. Have a technician to fit the display ( see instructions for this later in the manual ) you may need to calibrate the
pixels in the screen (see later )
4. Fit the standard accessories as described above.
Functional parts of the machine from right to left
(see pictures end of the manual)
2
Infeed tray for about 20 cm pf paper
11
Touch screen
3
Magnetic guides
4
Paper deflectors
13
Paper feed height adjustment sensor knob
14
Paper skew adjustment knob
15
Tray descent button (green)
12A
Fuse in power socket
16
Air blast vents with vernier sequential opening
17
Air blast adjustment knob with scale
Summary of Contents for Aerocard-Strike
