331 Auto Creaser 17
1. If you want low speed, Press 1,
“*” become besides “Low”, Press Enter,
screen jump to main operation MODE, low speed is chosen.
2. If you want high speed, Press 2,
“*” become besides “High”, Press Enter,
screen jump to main operation MODE, high speed is chosen.
5.3.9 Recalibration Screen
MODE 8 Recalibrate
If the Crease line gap is stretched or shirinked, the crease tolerance will be
accumulated as crease line increased. For a quick calibrate, we operate on
Recalibrate mode.
1. Measure the real length of a paper
2. Input the real length of the paper as following (say 420mm)
3. Press
, machine runs.
4. Pass the paper. And the Recalibrate is done automatically.
Note: If the input date is more than 3% tolerant to the real length, it fails
5.4 Hardware Setting
5.4.1 Skew adjustment
If it is found the crease is skewed (not vertical to the paper side), you need to
adjust the feeding angle to get a satisfied performance.
