You can set the press temperature and timer using the control panel .
Please follow the steps below to record the desired settings.
1.
Press SET button on the control panel (Figure 1) to go to the
temperature setting mode. You should now see “P - 1” on the display
(Figure 2).
2. Press UP or DOWN button to select the desired temperature
(Figure 3)
.
Tip: Enter the temperature either in °F or °C; you will be able to select the
temperature scale later.
1. Flip the ON / OFF switch to turn the press on. The control panel
and the switch become lit.
STARTING
PRESS
OPERATING INSTRUCTIONS
(continued)
INSTRUCTION MANUAL: DHP7
PAGE 8
Dulytek Equipment
www.dulytek.com
Email: [email protected]
© 2018 Dulytek
All rights reserved
I
E
SETTING
CONTROL
PANEL
E
E
3.
Press SET button again (Figure 4) to go to the timer settings mode. Now,
you should see “P - 2” on the display (Figure 5).
4.
Press UP or DOWN button to select the desired time in seconds (Figure
6)
.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6