Service Manual for
RCO Speed Oven
8
ELECTRICAL LOCKOUT/TAGOUT
PROCEDURE
Before performing any service that
involves electrical connection or disconnection
and/or exposure to electrical components,
always follow the Electrical LOCKOUT/TAGOUT
Procedure. Disconnect all circuits. Failure to
comply can cause property damage, injury
or death.
The Electrical LOCKOUT/TAGOUT Procedure is used
to protect personnel working on an electrical appliance.
Before performing any maintenance or service that
requires exposure to electrical components, follow
these steps:
1. In electrical box, place appliance circuit breaker
into OFF position.
2. Place a lock or other device on electrical box
cover to prevent someone from placing circuit
breaker ON.
3. Place a tag on electrical box cover to indicate
that appliance has been disconnected for service
and power should not be restored until tag is
removed by maintenance personnel.
4. Disconnect appliance power cord from electrical
outlet.
5. Place a tag on the cord to indicate that unit
has been disconnected for service and power
should not be restored until tag is removed by
maintenance personnel.
COVERS AND PANELS
Before performing any service that
involves electrical connection or disconnection
and/or exposure to electrical components,
always follow the Electrical LOCKOUT/TAGOUT
Procedure. Disconnect all circuits. Failure to
comply can cause property damage, injury
or death.
CAUTION:
Interior components and surfaces may
be hot if the unit has been in recent use.
Top Panel
Before performing any service that
involves electrical connection or disconnection
and/or exposure to electrical components,
always follow the Electrical LOCKOUT/TAGOUT
Procedure. Disconnect all circuits. Failure to
comply can cause property damage, injury
or death.
1. Remove the unit from its power source and follow
the proper Lockout/Tagout procedures.
2. Remove all of the sheet metal screws that secure
the Top Panel to the unit. Set aside for reuse.
3. Remove the Top Panel to gain access to the control
components.
Side Panels
Before performing any service that
involves electrical connection or disconnection
and/or exposure to electrical components,
always follow the Electrical LOCKOUT/TAGOUT
Procedure. Disconnect all circuits. Failure to
comply can cause property damage, injury
or death.
1. Remove the unit from its power source and follow
the proper Lockout/Tagout procedures.
2. Remove the Top Panel as described in the Top
Panel removal section.
3. Remove the screws securing the Side Panels.
Retain for reuse.
4. Removing the Side Panels provides access to
components not accessible from the rear of the unit.
Rear Panel Exhaust Vent Covers
Before performing any service that
involves electrical connection or disconnection
and/or exposure to electrical components,
always follow the Electrical LOCKOUT/TAGOUT
Procedure. Disconnect all circuits. Failure to
comply can cause property damage, injury
or death.
REMOVAL AND REPLACEMENT OF COMPONENTS
