Duke DU903, Operation Manual

Page: 8 / 38

Page 8
2-3.Checklist of electrical and safety function
Item Content inspection and safety requirement Result Comment
1 Is every terminal protected by isolation plate (IP2X)? YES
2 Does technician follow the procedure number to wire? YES
3
Are the diameter of grounding wire and each circuit accord
with safety requirement of designed electrical circuit?
YES
4
Is fuse accord with safety requirement of designed
electrical circuit?
YES
5 Are these screws on electric box fixed tightly? YES
6 Is the electric box equipped with a ventilator (e.g. fan)? YES
7 Does the design of electric box conform to IP requirement? YES
8
Is all the function of every control switch and component
described specifically on this operation manual?
YES
9 Are input voltage, frequency, and phase marked correctly? YES
10 Is the machine earthed? YES
11
Is there an independent earth copper plate equipped inside
electric box?
YES
12 Is every function of control device regular? YES
13 Is the emergency stop device functional? YES
14 Is the rotary direction of motor or transmission correct? YES
15 Is the cover functional (fixed or movable)? YES
16 Is the machine set stable? YES
17 Have all the acute angle and fur been ground? YES
18 Has the machine been pasted a CE mark? YES
19 Has the machine been pasted a nameplate? YES
20 Has the machine been pasted related warning marks? YES
21
Have the listed related safety parts in TCF 1.6 been installed
indeed?
YES
22
Have all the safety information and attentions been
provided completely for user?
YES
23
Does the written language of manual and machine conform
to local country?
YES
24 Has the operation manual been provided? YES
25 Has the EC Declaration of Conformity been signed? YES