Duke Manufacturing Co.
2305 N. Broadway • St. Louis, MO 63102
800.735.3853 • 3.231.1130 • 314.231.5074 Fax
www.dukemfg.com
17 of 29
DOOR ADJUSTMENTS & GASKET MAINTENANCE
1. Remove cover from hinges to expose the screws that hold the hinge to the front of the oven. See FIG 1.
2. Remove the hinge screws and door from the oven. See FIG 2.
3. Remove the door handle screws and flip the door handle over and replace it on the door. See FIG 3.
4. Remove the six screws on the front of the oven to expose the hinge screw holes for the other swing direction.
See FIG 4.
5. Use the six screws to fill the unused hinge screw holes on the front of the oven.
6. Remove the latch strike plate from the front of the oven and move it to the other side. Use the screws from the
other side to fill the screw holes that are no longer used. See FIG 5.
7. Position the door on the front of the oven and tighten the hinge screws. Make sure the door is level with the oven
body before the screws are tightened permanently. See FIG 6.
8. Adjust the door gasket seal.
Reversing Oven Door Swing Direction: