Duke 155131U, Installation And Operation Manual

Page: 13 / 32

13
Installation and Operation of 5/9 Electric Convection Oven
key to start a word from the Library. Once you have
chosen your word, press the “P” key.
ALARm X dONE will be displayed with either
AUTOmATIC or mANUAL. To change between the 2
settings, use the Left or Right arrow keys. Then press
the “P” key.
ALARM X TONE will be displayed with either
SHORT, MEDIUM, LONG, DOUBLE, LONG/
SHORT, or NONE. To change between the 6 set-
tings, use the Left and Right arrow keys. Then
press the “P” key.
NOTE: You can set up to 3 alarms per key. Follow
the above directions if 3 alarms are needed.
HOLD TIME will be displayed with the current
time XX:XX. To change the hold time, type in a
new time. Then press the “P” key
HOLD TEMP will be displayed with the current
hold temperature XXXF. To change, type in a
new temperature. Then press the “P” key.
HOLD DONE will be displayed with either AUTO-
MATIC or MANUAL. To change between the 2
settings, use the Left or Right arrow keys. Then
press the “P” key.
HOLD FAN SPEED will be displayed then either
HIGH or LOW. To change between the 2 settings,
use the Left or Right arrow keys. Then press the
“P” key.
PROdUCT hEAdS will be displayed with the cur-
rent head count setting 0-99. To change, type in a
new setting. Then press the “P” key.
To Exit Recipe Programming
From ALL being displayed, scroll up to EXIT and
press the “P” key. RECIPE will be displayed. Scroll
down to EXIT and press the “P” key.
SYSTEM PROGRAMMING 3228
Entering System Programming And Changing Sys-
tem Settings
Press and hold the “P” for 3 seconds.
PROdUCT CNT will be displayed. Press the down
arrow key.
PROGRAmmING will be displayed. Press the “P”
key.
ENTER COdE will be displayed. Type in 3228. Then
press the “P” key.
SySTEm will be displayed. Press the “P” key.
APPLIANCE TyPE will be displayed, then either
ELECTRIC FULL, ELECTRIC hALF, GAS hALF,
GAS FULL. To change between the 4 settings, use
the Left and Right arrow keys. Then press the “P”
key.
LANGUAGE will be displayed then either ENGLISh
or OThER. To change between the 2 settings. use
the Left or Right arrow keys. Then press the “P” key.
TONE vOLUmE will be displayed then either 1-4 or
NONE. To change between the 5 settings, use the
Left and Right arrow keys. Then press the “P” key.
TEmPERATURE will be displayed, then either F or
C. To change between the 2 settings, use the Left or
Right arrow keys. Then press the “P” key.
hOLd TImE will be displayed with the current time
XX:XX. To change the hold time, type in a new time.
Then press the “P” key
hOLd TEmP will be displayed with the current hold
temp XXXF. To change the hold temp, type in a new
temperature. Then press the “P” key.
hOLd dONE will be displayed with either AUTO-
mATIC or mANUAL. To change between the 2 set-
tings, use the Left or Right arrow keys. Then press
the “P” key.
hOLd FAN SPEEd will be displayed, then either
hIGh or LOw. To change between the 2 settings,
use the Left or Right arrow keys. Then press the “P”
key.
SETBACK TImE will be displayed, then XX:XX. To
change the Setback time, type in a new time. Then
press the “P” key
SETBACK TEmP will be displayed with the current
setback temp XXXF. To change the setback tem-
perature, type in a new temperature. Then press the