Duke Fitness DU-SC50, Assembly And Operating Instructions Manual

Page: 17 / 36

17
SC50
Step 5: Alignment of the Feet
If the floor is uneven, you can stabilize the equipment by rotating the foot pads
(47) under the stabilizers (45 & 48).
1. Lift the indoor cycle on the desired side and rotate the foot pad (47).
2. Rotate the foot pads (47) clockwise to remove it and raise the equipment.
3. Rotate the foot pads (47) counterclockwise to lower the equipment.
Step 6: Insertion of the Batteries
The console is powered by two AAA 1.5V batteries. In case the console is not working properly, the
batteries might be running low. Follow the instructions to exchange the batteries.
L
NOTICE
Pay attention to the correct polarity (+ and -) in the following step.
1. Remove the battery cover from the console and insert the two supplied AAA 1.5V-batteries.
2. Close the battery compartment again.