Dukane iQ MPC-E, Quick Start Manual, Page: 17 / 30

iQ Series , MPC-E User’s Manual
14
LED Colors MPC-E Alarms Description
yellow - Blinking Power Not OK
MPC-E +24VDC power supply input is
out of range.
Red to yellow - Blinking Hardware/Configuration Fault See iQ Commander for fault description.
Orange Invalid Probe Selection
Example: Generator selects Probe 8 but
MPC-E only has 6 outputs.
White Unpaired MPC-E is not paired with a generator.
White to yellow - Blinking No Connection
MPC-E is paired with a generator but
not connected.
White to Red - Blinking Connection Lost
MPC-E connection with generator was
lost.
White to Blue - Blinking Awaiting Pairing
MPC-E has sent pairing request and is
awaiting response.
White to Green - Blinking Pairing in Process
Generator has responded to MPC-E
request and pairing is in process.
White to Orange - Blinking Invalid Generator Pairing
White to Violet - Blinking Visual Pairing Conformation
Generator and MPC-E it is paired with
display same pattern.
LED Colors
Generator Alarms Displayed
by MPC-E
Description
Blue U104 (Frequency Overload 1) Frequency Lock Failed (from generator)
Blue - Blinking U112 (Frequency Overload 3) Frequency Limit Exceeded
Red - Blinking U106 (Peak Overload)
Generator output current exceeded safe
operating level.
Red U108 (Average Overload)
Generator output power exceeded rated
power of the generator.
Orange - Blinking U116 (Over Voltage Overload)
Transducer voltage exceeded the
maximum expected value.
Purple - Blinking Cycle Start Rejected
Generator was not ready when cycle start
was attempted.
“STATUS” LED Color Patterns
Table 4-1 STATUS LED Color Pattern Descriptions
SE
CTION 4
| LED D
ESCRIPTIONS