Dukane iQ MPC-E, Quick Start Manual, Page: 15 / 30

iQ Series , MPC-E User’s Manual
12
CAUTION
Ultrasound Connectors
The ultrasound input and output
connectors are a high voltage
(5000V) coaxial style SHV-BNC
connector. This connector provides
superior shielding of electrical noise,
compared to other types of con-
nectors. The ultrasound connectors
mate with a fully shielded coaxial
ultrasound cables that are secured
with a simple and reliable quarter-
turn bayonet style attachment
mechanism.
Do not use the MPC-E if there is
any evidence of arcing (black carbon
deposits) on either the ultrasound
connectors or the ultrasonic cable
connectors.
Distance Input Connector
This is the analog inputs for an MPC-E with a “D” in the model number.
Example: MPCEHD8.
Each input connects to an individual distance encoder. A maximum of 8
inputs for ultrasonics probes is supported.
The number of supported analog inputs is equal to the number of distance
input connections.
Each individual analog input is configured in the I/O tab of the iQ
Commander software.
The “+” row is for the positive input for the analog input.
The GND row is for the ground input for the analog input.
The number columns represent the analog input number. Example: “1” is
Analog Input 1.
For additional information on using the analog distance inputs, refer to the
“Configuring the Auto Plus/AiM for Distance” section of application note
AN528 at the following link below:
https://documents.dukane.com/AppNote/AN528.pdf
Ultrasound Input J1
This is the MPC-E Module ultrasonic input. This is connected to the
generator J1 output connector.
SE
CTION 3
| S
TAND
ARD
C
ONNE
CTIONS