Dukane ImagePro 8944 User Manual Download Page 95

Page: 95 / 178

Projector

8944

User’s Manual – Network Functions

Section

This

section

is only intended to explain Network Functions.

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Trademark acknowledgment

• Windows is a registered trademark of Microsoft Corporation.

All other trademarks are the properties of their respective owners.

Due to the continual evolution of software, this guide and the associated
programs will be continually updated. The upgrade will be provided free
and will be provided by Hitachi. Please check the following web addresses
to get the latest revisions.

http://www.hitachi.us/digitalmedia

http://www.hitachidigitalmedia

Summary of Contents for ImagePro 8944



















































































































































































Search results

Summary of Contents for ImagePro 8944

Reviews:

Related manuals for ImagePro 8944

Brands by name

Popular brands

Dukane ImagePro 8944, User Manual

Search results

Summary of Contents for ImagePro 8944

Reviews:

Related manuals for ImagePro 8944

Brands by name

Popular brands