70
Communication settings
Communication settings
RS-232 Communication
When the projector connects to the computer by RS-232 communication, the projector can be
controlled with RS-232 commands from the computer. For details of RS-232 commands, refer to RS-
232 Communication command table.
Connection
1. Turn off the projector and the computer.
2. Connect the projector's RS232 port and the computer's RS-232 port with a RS-232 cable (straight) . Use the cable that
fulfills the specification shown in the figure
3. Turn the computer on, and after the computer has started up turn the projector on.
CD (1)
(1)
－
RD(2)
(2) TD
TD (3)
(3) RD
DTR (4)
(4)
－
GND (5)
(5) GND
DSR (6)
(6)
－
RTS (7)
(7) CTS
CTS (8)
(8) RTS
RI (9)
(9)
－
1
2
3
4
5
1
2
3
4
5
7
8
9
6
9
8
7
6
RS-232 port of
the projector
RS-232 port of
the computer
RS-232 cable
(
straight
)
RS-232
RS-232
Note: In case of replacement and RS-232 cable (cross) has been installed, please add a packed RS-232 cable (cross) to
make connection correctly.
Summary of Contents for 9080WUSS
Page 69: ...69 Projector specifications Dimensions 212mm 576mm 500mm...
Page 89: ......