47
OSD Menu description
•
H Position
Use ◄► to adjust the projected picture’s horizontal position.
If the projected picture is not at the center of the screen (i.e. shifted to right or left) and
ends up being cropped, use this function to adjust the picture’s horizontal position. The
following picture is an example of test picture from an external signal source:
Native picture
Skewed
Right
Left
•
H Phase
Use ◄► to adjust the projected picture’s phase.
Use this function to adjust the phase of pixel sampling clock (relative to input signal).
Should the picture still flicker or show noise (i.e. edges on texts) after optimization, adjust
phase accordingly.
•
H Size
Press ◄► to adjust the horizontal total.
Use this function to adjust the clock frequency of pixel sampling (horizontal pixel frequency
of the analog input source generated by the ADC). If you notice flickering or vertical lines
in the picture, it means that the pixel sampling frequency is insufficient. You can use this
function to adjust the frequency to achieve consistent picture quality.
The following picture is an example of test picture from an external signal source:
Adjust picture quality by changing
the value of horizontal total to
smoothen the picture.
*In order to adjust timings the pattern should be used is pixel (on/off)*
Auto Adjust
When Auto image was selected in the OSD menu, press
ENTER
to execute the automatic picture
adjustment function.
By executing this function, the projector will resync the picture. Use this function when the
picture source is unstable or when you notice deterioration in picture quality and the projector will
automatically adjust the picture size, phase and timing. (The adjustment also applies to PinP input
source).
This function is identical to the
AUTO
button on the remote control. You can simply use the hot key on
the remote control to execute this function.
Summary of Contents for 9080WUSS
Page 69: ...69 Projector specifications Dimensions 212mm 576mm 500mm...
Page 89: ......