Dukane 8112 User Manual Download | Manualshive

Page: 66 / 79

background image

66

Maintenance

Maintenance

A lamp has ﬁnite product life. Using the lamp for long periods of time could cause
the pictures darker or the color tone poor. Note that each lamp has a different
lifetime, and some may burst or burn out soon after you start using them.
Preparation of a new lamp and early replacement are recommended. To prepare
a new lamp, make contact with your dealer and tell the lamp type number.

Replacing the lamp

Type number :

456-8112

1.

Turn the projector off, and unplug the power cord.
Allow the projector to cool for at least 45 minutes.

2.

Prepare a new lamp. If the projector is mounted on
a ceiling, or if the lamp has broken, also ask the
dealer to replace the lamp.

3.

Loosen the screw (marked by arrow) of the lamp
cover and then slide and lift the lamp cover to the
side to remove it.

4.

Loosen the 2 screws (marked by arrow) of the lamp,
and slowly pick up the lamp by the handles.

Never

loosen any other screws.

5.

Insert the new lamp, and retighten ﬁrmly the 2
screws of the lamp that are loosened in the previous
process to lock it in place.

6.

While putting the interlocking parts of the lamp cover
and the projector together, slide the lamp cover back in
place. Then ﬁrmly fasten the screw of the lamp cover.

7.

Turn the projector on and reset the lamp time using
the LAMP TIME item in the OPTION menu.

In case of replacement by yourself, follow the
following procedure.

Replacing the lamp

(3) Point at the OPTION in the left column of the menu using the ▲/▼ cursor buttons,

then press the ► cursor (or the

ENTER

) button.

(4) Point at the LAMP TIME using the ▲/▼ cursor buttons, then press the ► cursor (or

the

ENTER

/ the

RESET

) button. A dialog will appear.

(5) Press the ► cursor button to select the “OK” on the dialog. It performs resetting the lamp time.

• Please reset the lamp time only when you have replaced the lamp,

for a suitable indication about the lamp.

NOTE

►Do not touch any inner space of the projector, while the lamp

is taken out.

CAUTION

(1) Press the

MENU

button to display a menu.

(2) Point at the ADVANCED MENU in the menu using the ▲/▼

cursor buttons, then press the ► cursor (or the

ENTER

) button.

Handles

lamp cover

«
...
64
65
66
67
68
...
»

Summary of Contents for 8112
















































































Reviews:

No comments

Related manuals for 8112

Brand: 3M Pages: 9

Brand: Panamax Pages: 4

Brand: Panamorph Pages: 2

Brand: Digital Projection Pages: 12

Brand: Optoma Pages: 67

TheaterLite DXG-210

Brand: Zenith Pages: 13

Brand: Optoma Pages: 1

Ritzscreen V540

Brand: Verano Pages: 12

Brand: Barco Pages: 2

PORTABLE LED PROJECTOR KIT

Brand: Wanderer Pages: 10

Brand: Zenith Pages: 52

Brand: Vivo Pages: 5

Brand: JVC Pages: 22

Brand: JVC Pages: 5

Brand: Sanyo Pages: 1

Brand: Sanyo Pages: 3

Brand: Sanyo Pages: 2

Brand: Sanyo Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands