Dukane 8107WIB User Manual Download Page 1

Page: 1 / 122

Projector

8107WIB

User's Manual (detailed)

Operating Guide

Thank you for purchasing this projector.

►Before using this product, please read all manuals for this

product. Be sure to read “

Safety Guide

” first. After reading them, store them in a

safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The illustrations in this manual are for illustrative purposes. They may differ

slightly from your projector.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Trademark acknowledgment

Various symbols are used in this manual. The meanings of these symbols are

described below.

About this manual

WARNING

CAUTION

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly

result in personal injury or physical damage due to incorrect

handling.

Please refer to the pages written following this symbol.



• Mac

is a registered trademark of Apple Inc.

• Windows

, DirectX

, DirectDraw

and Direct3D

are registered trademarks of Microsoft

Corporation in the U.S. and/or other countries.

• VESA and DDC are trademarks of the Video Electronics Standard Association.

• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.

• Trademark PJLink is a trademark applied for trademark rights in

Japan, the United States of America and other countries and areas.

• Blu-ray Disc

and Blu-ray

are trademarks of Blu-ray Disc Association.

• StarBoard

is a registered trademark of Hitachi Solutions, Ltd. in Japan and other countries.

All other trademarks are the properties of their respective owners.

NOTICE

This entry notices of fear of causing trouble.

403-8107WIB-

General

-00

Summary of Contents for 8107WIB



























































































































Search results

Summary of Contents for 8107WIB

Reviews:

Related manuals for 8107WIB

Brands by name

Popular brands

Dukane 8107WIB, User Manual

Search results

Summary of Contents for 8107WIB

Reviews:

Related manuals for 8107WIB

Brands by name

Popular brands