Dukane 8103H, User Manual

Page: 12 / 21

11
ENGLISH
11. Turning the projector off
Turn the projector off after turning off the other connected devices, unless mentioned in
the manuals. For this projector, follow the procedure below.
1.
Press the
STANDBY/ON
button (on the
projector or remote control).
The “
Power off?
” dialog appears on the screen
for about 5 seconds.
2.
Confirm that there is nothing that the lens door
hits while closing.
Then press the STANDBY/ON button again
while the message appears.
The projection lamp goes off, the lens door
closes, and the POWER indicator begins to
blink orange.
NOTE
• For cooling the projector down, wait for the
POWER
indicator to stop blinking and turn
steady orange.
The projector can be turned off without waiting
for cooling down. However, the manufacture
recommends cooling the projector down
enough.
Do not turn the projector on for about 10
minutes or more after turning it off to prevent
shortening its life.
3.
Press the side marked “ O ” of the power switch, as the power-off position.
The POWER indicator goes off.
NOTE
• This projector has the
AUTO POWER OFF
function. For details, see the
Operating
Guide
in the CD.
CAUTION
■ Be careful not to pinch your finger with the lens door, to prevent an injury.
■ Do not touch the lamp cover or approach the exhaust vents while using the projector
and for a while after use, to prevent a burn.
When you will not use the projector for a long while, unplug and separate the power cord
from the power outlet, for safety purposes.
VIDEO DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTER
MY SOURCE/
AUTO
MAGNIFY VOLUME
ー
ON
OFF
＋
FREEZE
FOCUS D-ZOOM
- + - +
LAMP
TEMP
POWER
STANDBY/ON
INPUT
POWER
indicator
STANDBY/ON
button
Power
switch
STANDBY/ON
button
d11_01CP-A200_CO_ENG.indd 11 2009/12/22 9:37:56