Dukane 6650HDSSA User Manual Download

Page: 94 / 147

5. Installation and Connections

Connecting to a Wireless LAN (Optional: NP05LM series)

The USB Wireless LAN Unit also provides a wireless LAN connection. To use a wireless LAN connection, you are
required to assign an IP address to the projector.

Important:

• If you use the projector with the USB Wireless LAN Unit in the area where the use of wireless LAN equipment is prohibited, remove

the USB Wireless LAN Unit from the projector.

• Buy the appropriate USB Wireless LAN Unit for your country or area.

NOTE:

• Your computer’s wireless LAN adapter (or unit) must be complied with Wi-Fi (IEEE802.11a/b/g/n) standard.

Attaching the USB Wireless LAN Unit

NOTE:

• The USB Wireless LAN Unit must be inserted into the USB Wireless LAN Unit port in the correct direction. It cannot be inserted

in the reverse direction. If the USB Wireless LAN Unit is inserted in the reverse direction with excessive force applied, the USB

port may break.

• Before touching the USB Wireless LAN Unit, touch a metallic object (such as a door knob or aluminum window frame) to discharge

the static electricity from your body.

• Always insert or remove the USB Wireless LAN unit when the main power is turned off. Failure to do so may cause projector

malfunction or damage to the USB wireless LAN unit. If the projector will not work correctly, turn off the projector, disconnect

the power cord, and then connect it again.

• Do not insert other USB devices into the USB (wireless LAN) port in the wireless LAN cover. Do not insert the USB Wireless LAN

unit into the USB port.

NOTE:When the cable cover is attached, remove it before inserting the USB Wireless LAN Unit.

1. Press the POWER button to turn off the projector and set it

into standby condition, and disconnect the power cord.

2. Remove the wireless LAN cover.

(1) Turn the screw counterclockwise until it turns freely.

(2) Hold the head of the screw and remove.

Summary of Contents for 6650HDSSA




















































































































































Search results

Summary of Contents for 6650HDSSA

Reviews:

Related manuals for 6650HDSSA

Brands by name

Popular brands

Dukane 6650HDSSA, User Manual

Search results

Summary of Contents for 6650HDSSA

Reviews:

Related manuals for 6650HDSSA

Brands by name

Popular brands