Dukane 401-8755E-01 User Manual Download

Page: 31 / 82

PICTURE Menu

Item

Description

MY MEMORY

Selecting a mode of MY MEMORY using the buttons ▲/▼ and then

pressing the button ► or the ENTER button performs each function.

LOAD

LOAD3

LOAD4

SAVE4

SAVE3

SAVE

This projector has 4 numbered memories for adjustment data.

Performing the LOAD, LOAD, LOAD3 or LOAD4 loads the data on

the memory whose number corresponds to the command’s number,

and adjusts the picture automatically depending on the data.

Performing the SAVE, SAVE, SAVE3 or SAVE4 saves the current

adjustment data on the memory whose number corresponds to the

command’s number.

• The current adjustment data of the items in the PICTURE menu is

stored.

•

There may be some noise and/or the screen may flicker for a

moment when data is loaded to memory. This is not a malfunction.
When the current settings are not saved to memory the following

dialog is displayed.

To load saved adjustment settings press the MEMORY button.

When there are no saved adjustment settings the following dialog is

displayed.

PICTURE Menu (continued)

6GORQTCT[EQPFKVKQP

/'/14;

4GECNNUCXGFRCTCOGVGTU

3WKV

0QUCXGFFCVC

Summary of Contents for 401-8755E-01



















































































Search results

Summary of Contents for 401-8755E-01

Reviews:

Related manuals for 401-8755E-01

Brands by name

Popular brands

Dukane 401-8755E-01, User Manual

Search results

Summary of Contents for 401-8755E-01

Reviews:

Related manuals for 401-8755E-01

Brands by name

Popular brands