33
Network
:
The projector has an RJ45 Ethernet connector that supports net-
work connections and TCP/IP protocols. This will allow for the control and
management of the projector over a corporate network. The following fields
are accessible when DHCP is not checked and available for manual entry of
data.
IP Address:
Identifies the projector on the network.
Subnet mask:
Separates the network address part of the IP address.
Default gateway:
The IP address of the local router.
DHCP:
Select this to automatically obtain an IP address, Subnet mask,
and Default gateway.
Network Info:
Provides information on the network configuration.
The
Network Info
menu is informational and cannot be edited. It displays
the current IP Address, Subnet Mask, Default Gateway, and the projector’s
MAC Address.
Language
: allows you to select a language for the onscreen display of
menus and messages.
Service
:
To use these features, highlight them and press
Select
.
Factory Reset
: restores all settings (except Lamp Hours and Network set-
tings) to their default after displaying a confirmation dialog box.
Lamp Reset
: resets the lamp hours counter in the About menu to zero. Do
this only after changing the lamp. It displays a confirmation dialog box.
Service Code
: only used by authorized service personnel.
Network
Network
Info
Language
Service menu
Summary of Contents for 28A8757
Page 1: ...Audio Visual Products USERS MANUAL MODEL 28A8757 ...
Page 2: ......
