28
SETTING THE POWER
The sequence for registering the new Power Limit for the hob is:
● press the front left heating element 7 and the front right heating element 6 selection keys together (see fig.
20);
● after performing this operation, the new Power Limit of the hob is registered and the system resets itself.
To end without registering any change
● If no action takes place within 60 seconds, the changes are not registered and the system reseti itself.
FIG. 20
Functions of the hob ECO power
For the ECO power of the hob, every time the user tries to increase the power, the total level of the latter
is calculated. If this total power level is higher than the total Power Limit set, the increase in power is not
allowed. An acoustic signal sounds and the hob display shows an “
r
” for 3 seconds (see fig. 21).
FIG. 21
