15
USE
TIMER
There is a timer for setting cooking times from 1 to 99 minutes (symbol ).
After activating the cooking area required, selecting it on the display, activate the timer by pressing the
or
symbol above the
symbol. Then return to the heating element to be programmed by pressing its
or
symbol. Return to the timer and set the programming time using the
or
symbol. The
programmed heating element is highlighted by the corresponding led above the cooking level indicator.
The timer will start 5 seconds after the last symbol has been pressed and the heating element will operate
until the number on the display reaches 0. The heating element will then switch off automatically. When the
time ends a sequence of beeps will be repeated at 3 second intervals for 1 minute.
During timed cooking it is possible to change the operating power and the cooking time. Every time the
or
symbols of the cooking area are pressed, the heating element operating power is increased or
reduced. To change the amount of time remaining, it is necessary to press the
or
symbol of the
heating element until the led position in the cooking area switches on. Then the operating time can be
changed using the
and
symbols of the timer.
KEY LOCK FUNCTION
Lock Function
(
): this function prevents the hob from being accidentally switched on (child safety
lock). To activate it, the
sensor must be pressed for about three seconds (the warning light comes
on). It is not possible to make the heating areas work if
is active. If the heating elements are still
working, it is possible to switch them off while
is active. This function is deactivated by pressing the
sensor for two seconds, for all the configurations.
RESIDUAL HEAT
Every plate has a device which indicates the presence of residual heat. On the display, after switching off
any plate, an
may appear. This signal indicates that the cooking area is still very hot. It is possibile
to start cooking food again even when the
is visibile, by reactivating the heating element required.
SWITCHING OFF THE PLATES
The plates switch off when the relative operating power display indicates 0. The plate will be
automatically deactivated five seconds after the 0 appears on the display. If the plates are hot, the
indicating the presence of residual heat will appear. To immediately switch off an element, simply touch
the
and
keys together, or the
key until 0 appears on the display.
SWITCHING OFF THE HOB
The hob is switched off by pressing the
symbol for one second, even if the plates are operating; all
the plates will be deactivated and the hob will switch off completely. If the plates are hot, the
indicating the presence of residual heat will appear after switching off. There is a heat protection system
installed inside the hob. If the temperature exceeds 95 °C, the hob switches off automatically. This is to
prevent excessive temperature from damaging the internal components.
