18. Operation and repairs
Periodic control of the harness condition will keep it in safe operation for a long time. After each hard landing check the back
protector too, as the seams or zip quite often get ripped when absorbing impact and damaged protector will be ineffective. If you
notice damage to its cover, send it back to the producer for a repair or buy a new one.
Correspondingly, after each use of rescue chute thoroughly check entire harness for damages, paying particular attention to the
straps and seams.
Aluminium carabiners should be replaced each 5 years or 300 hours airtime. Scratched or damaged carabiners are not serviceable
anymore and have to be replaced at once.
Using damaged harness is out of the question. In case of any doubts please contact your dealer or manufacturer and/or send it to an
authorized workshop for closer inspection.
i
Techno harness has an airworthiness certificate for 10 years since the date of production.
The AF-15/2018 protector is allowed to remain in operation within 10 years from the date of production.
Environmental care
Paragliding is an outdoor sport. We believe that our clients share our environmental awareness. Exercising paragliding you can easily
contribute to environment preservation by following some simple rules. Make sure you are not harming nature in places where we
can fly. Keep to marked paths, do not make excessive noise, do not leave any garbage and respect fragile balance of the nature.
Recycling of used gear
Harness is made out of synthetic materials, which need to be properly disposed of when worn out. If you are not able to dispose of
the paraglider properly, DUDEK Paragliders will do that for you.Just send your harness to the address given at the end of the manual,
accompanied by a short note.
32
Summary of Contents for Techno
