background image

Colt has an elliptic shape with slightly back-swept wingtips. The canopy is 
made of doubled cells, with ribs supported by VSS (V-Shaped Supports) 
system. Such design guarantees that the canopy stays rigid, the upper 
surface is smooth with correctly reproduced aerofoil, and what is most 
important we have fewer suspension points (thus reducing overall lines' 
length and drag).

Inside the canopy there is RSS (Reinforcing Strap System) applied on the 
lower surface. RSS is a ballooning-independent reinforcement system made 
entirely of paragliding fabric, stiffening and stabilizing the canopy.

The aerofoil was perfected with DOA technology 
(Dudek Optimized Airfoil). It merges all our experiences 
stemming from previous designs and as a special 
feature is optimized with dedicated CFD engineering 
software. 

The suspension points areas are additionally reinforced with laminated fabric 
so that loads are equally distributed on three planes: vertically (with the ribs), 
diagonally (with VSS system) and level through RSS.

All crossports have been prepared with application of OCD (Optimised 
Crossports Design). Carefully designed shapes of the openings and their 
optimal placement between stress lines guarantee efficient pressure 
distribution in the canopy and its quick inflation. These openings are scaled 
together with the ribs, so that their replicability is flawless and they do not 
disturb the aerofoil in any way.

Another feature of the Colt is the Flexi-Egde 
technology. The leading edge is closed to the 
airflow, and its precise shape is kept with laminated 
cloth reinforcements, incorporating synthetic rods. 
The rods make the leading edge stiffer and 

smoother, bringing improvements in many areas - from easier inflation, 
through stiffening the canopy in flight to improved general airflow. 

The intakes are located on the undersurface in the vicinity of leading edge. 
Their position was chosen  very carefully, so that they got maximum ram 
effect in possibly many flight situations. 

The wing tips additionally feature ACS (Auto 
Cleaning Slots) – as the name suggests, these are 
dedicated openings automatically removing dirt from 
inside the canopy.

Careful selection of modern fabrics and design solutions brings about great 
strength and durability of the Colt. All materials used come from marked 
production batches, and each production step can be verified down to 
identification of specific worker and controller.

5

USER MANUAL

Summary of Contents for Colt 23 S

































Reviews: